Jaw Crusher is mainly used to
crush kinds of mining stones primarily, and the
largest compression resistance of the material to be
crushed is 320MPa. The jaw crusher is widely used in
mining, metall-urgical industry, building material,
highway, railway, and chemical industry.
Working Principle of Jaw Crusher:
The motor transmits power through belt, drives the
moving jaw do periodic motion to the fixed jaw
surround the eccentric shaft. The angle between
toggle plate and moving jaw increases when moving
jaw moves up. So the moving jaw closes to the fixed
jaw. The stuff will be crushed in this process. The
angle of Jaw Crusher between toggle plate and moving
jaw decreases when moving jaw moves down, the moving
jaw of Jaw Crusher moves away from fixed jaw by the
pulling of rod and spring, the products after
crushing will be discharged from the outlet of Jaw
Crusher.
Characteristics of Jaw Crusher:
High ratio of crushing, homogeneous final grain
size, simple structure, reliable working condition,
easy maintenance, low operating cost.
Technical Data of Jaw Crusher:
|
Mineral processing
equipment
