|
 |
Products Name : Log
Washer | Twin Coarse
Material Washer | Wash
Plant | Material Washer |
|
Products Description
:
|
Features
♦
Log Washers ideal for scrubbing difficult materials
such as tough insoluble clays, conglomerates, soft
stone and cemented aggregate
♦
High capacity
♦
Heavy duty conveying paddles
♦
Fabricated with heavy duty tubs
♦
Oversize bearings and gears
♦
Thick-walled shafts
♦
Lower end bolted to fully machined stub shaft. Upper
end mounted through flexible coupling to output
shaft of gearbox
♦
The compound drive divides the operating load over
an optimal combination of oversized helical and spur
gears
♦
Continuous grinding and abrading log washer paddles
♦
Adjustable water discharge gates on both sides of
lower end of the tub
Descriptions
Our Log Washers are ideal for scrubbing
difficult material. Tough insoluble clays,
conglomerates and soft stone, and certain cemented
aggregates are too difficult to clean properly in
normal screw machines. The log washer thoroughly
scouring, breaks down, and cleans the toughest
materials. These high quality, highly durable
machines perform well under the toughest clay
conditions with minimum power, water and downtime.
Feed material is normally delivered between two to
four feet from the feed end of the box and is
subjected to an aggressive washing action resulting
from the intermeshing paddle design. The paddles
perform two functions: they help convey material and
are the catalyst to material on material scrubbing.
The clean material works uphill, between the shafts,
and is discharged out the bottom of the box.
Deleterious materials are absorbed into water and
carried over a weir on either side of the box. The
length of the washer box is dependent upon the
percentage and tenacity of clay or the waste to
removed.
Technical Specifications
Model |
Spiral Dia.(mm) |
Rotating Speed(r/min) |
Feeding size
(mm) |
Tank slope
(o) |
Output(t/h) |
Power(kw) |
Weight(t) |
2RXL320 |
Φ320×3200 |
28 |
≤30 |
≤12 |
10 |
4 |
0.9 |
2RXL400 |
Φ400×4600 |
23 |
≤30 |
≤12 |
20 |
5.5 |
1.9 |
2RXL540 |
Φ540×4600 |
23 |
≤30 |
≤12 |
25 |
7.5 |
3.9 |
2RXL750 |
Φ750×7600 |
22.7 |
≤70 |
≤12 |
50 |
40 |
17.2 |
2RXL800 |
Φ800×7600 |
22 |
≤70 |
≤12 |
70 |
45 |
18.9 |
2RXL914 |
Φ914×7600 |
21 |
≤70 |
≤12 |
100 |
55 |
23 |
|
|
|